Skip to content

A Beginner’s Guide to Enology

Wine is grape juice transformed by yeast, bacteria, oxygen, and the decisions of the winemaker. Enology is the science that explains that transformation: what grapes contain, how they should be processed, what happens during fermentation and aging, how things go wrong, and how wine is regulated and controlled. This guide follows the winemaking process from grape to bottle and ends with health aspects, legislation, and quality control.


1. Chemical Composition of Grapes, Musts, and Wine

A winemaker works with what the grape provides. Knowing the main compound classes explains why every technological step exists.

Carbohydrates

Ripe grapes contain roughly 150-250 g/L of sugar, mostly glucose and fructose in near-equal amounts at full ripeness (fructose usually slightly dominates in overripe or botrytized fruit). Sugar level determines potential alcohol: about 16.5-17 g/L of sugar yields 1% vol. of alcohol. Must sugar is measured with a hydrometer or refractometer in °Oechsle, °Brix, °Baumé, or KMW (°Babo), depending on country.

Other carbohydrates matter too. Pentoses (arabinose, xylose) are not fermented by yeast and remain in dry wine. Pectins and polysaccharides affect juice viscosity and clarification, and glucans produced by Botrytis can make filtration difficult. Mannoproteins, released by yeast, contribute to mouthfeel and stability.

Organic acids

Acidity gives wine freshness, microbial stability, and balance.

  • Tartaric acid (about 2-10 g/L) is the characteristic grape acid and the strongest of the main acids. It is stable to microbes, but its potassium salt can precipitate as crystals.
  • Malic acid (1-8 g/L, high in cool climates and unripe grapes) declines during ripening and can be converted to lactic acid by malolactic fermentation.
  • Citric acid occurs in small quantities.
  • Fermentation-derived acids include succinic, acetic (volatile), lactic, and others.

Titratable acidity is expressed as g/L tartaric acid (or sulfuric in some countries), and pH is typically 2.9-3.9. pH affects microbial stability, the effectiveness of SO₂, color of red wines, and sensory perception.

Phenolic compounds

Phenolics are responsible for color, astringency, bitterness, and much of the aging potential.

  • Non-flavonoids: hydroxycinnamic acids (caffeic, coumaric), hydroxybenzoic acids, stilbenes (resveratrol). They are mostly in the pulp and skin and dominate white wines.
  • Flavonoids: anthocyanins (red pigments from skins), flavan-3-ols and tannins (procyanidins from skins, seeds, and stems), flavonols (quercetin, kaempferol), and flavanones.
  • Hydrolysable tannins come from oak.

Red wines contain about 1,000-3,000 mg/L total phenolics, white wines about 200-300 mg/L. During aging, anthocyanins and tannins polymerize into more stable pigments, so wine color shifts from purple to brick-red.

Nitrogen compounds

Nitrogen exists as ammonium, free amino acids, peptides, proteins, and amines. Yeast assimilable nitrogen (YAN), which is ammonium plus most amino acids, is essential for fermentation. As a guideline, at least 140-150 mg N/L is needed for a trouble-free fermentation of moderate-sugar must, and more is required for high-sugar must. Proteins, particularly pathogenesis-related proteins, can cause haze in white wines. Biogenic amines such as histamine form through microbial decarboxylation of amino acids.

Minerals and microelements

Grapes contain potassium (the dominant cation, 0.5-2 g/L), calcium, magnesium, and sodium, as well as trace elements: iron, copper, zinc, manganese, and others. Potassium and calcium determine tartrate and oxalate stability. Iron and copper are catalysts of oxidation and can cause hazes (casse). Heavy metals such as lead, cadmium, and arsenic are regulated and monitored.

Gases

  • Oxygen: dissolves up to around 8-9 mg/L at saturation (air, 20 °C). It is essential for yeast sterol synthesis at the beginning of fermentation but harmful later, driving browning and loss of aroma.
  • Carbon dioxide: produced during fermentation. It protects against oxidation, contributes freshness (especially in young whites and rosés), and is the basis of sparkling wines. About 1.5-2 g/L stays dissolved in still wine.
  • Nitrogen (and argon): inert gases used to displace oxygen during pressing, transfers, storage, and bottling.

Other volatile compounds such as sulfur dioxide and hydrogen sulfide are treated separately in the sections on microbiology and faults.


2. Grape Processing and Primary Must Treatment

Harvest and reception

Harvest date is based on sugar, acidity, phenolic and aromatic ripeness, and health status. Hand harvest preserves whole bunches; machine harvest is fast and cheap but needs prompt processing. At the winery, grapes are sorted, destemmed, and crushed, either together or separately depending on style.

White wine schemes

White wines are normally made without skin contact fermentation, though technique varies:

  1. Immediate (direct) pressing of whole bunches: gives the lightest, most delicate juice with low phenolics. It is the standard for sparkling base wines and delicate aromatic whites.
  2. Destemming and crushing followed by pressing: higher yield, more extraction.
  3. Short skin maceration (pre-fermentative, 2-24 hours, at cool temperatures): increases aroma precursors and body, typical for Sauvignon blanc, Malvazija, Rebula, or Muscat styles. It raises phenolics and potassium, and may raise pH.
  4. Orange or skin-contact whites: extended maceration, even weeks or months, yielding tannic, amber-coloured wines.

After pressing, the juice undergoes settling (débourbage) at low temperature, perhaps with enzymes and SO₂, or flotation, centrifugation, or filtration, to remove solids. Clean must gives cleaner aromas, though excessive clarification can reduce nutrients and lipids needed by yeast.

Red wine schemes

Red wine color and tannin come from skin contact during fermentation.

  • Traditional maceration: crushed grapes ferment on skins for 5-30 days. CO₂ pushes skins to the top as a cap, which is managed by punch-downs, pump-overs, or rotary or other special fermenters to extract color, tannin, and aroma.
  • Pre-fermentation cold soak: maceration at 5-12 °C for a few days, favoring anthocyanin and aroma extraction without alcohol.
  • Thermovinification and flash détente: heating the crushed grapes (60-80 °C) to extract color rapidly, used for lighter fruit-driven wines and rot-affected grapes, because it inactivates laccase.
  • Extended post-fermentation maceration: maintains contact for added tannin polymerization and softness.
  • Rosé: short maceration of red grapes (hours) followed by pressing, or direct pressing (saignée is a by-product bleed method).

Carbonic maceration

In carbonic maceration (typical of Beaujolais), whole, uncrushed bunches are placed in a closed, CO₂-filled vessel. Within the berries, an intracellular (enzymatic) anaerobic fermentation produces up to 1.5-2.5% vol. of alcohol and generates distinctive aromas (bubblegum, cherry, banana, spice). Then the grapes are pressed and fermentation is finished by yeast. The result is low in tannin, fruity, and meant for early drinking. Semi-carbonic maceration applies the same principle where some grapes are crushed in the bottom of the tank by the weight of the others.

Must correction (allowed operations)

Rules differ by region and legislation, but many countries and the EU permit the following corrections within limits:

  • Enrichment: raising potential alcohol using sucrose (chaptalization/sugaring), concentrated grape must, or rectified concentrated grape must (RCGM). EU rules limit the increase by wine-growing zone (about 1.5-3% vol.), and chaptalization is banned in some southern regions.
  • Acidification: with tartaric acid (and lactic or malic acid in some jurisdictions) in low-acid musts, typically with an upper limit.
  • Deacidification: with calcium carbonate, potassium bicarbonate, or double-salt methods, in high-acid musts, again with limits. In general, a wine cannot be both enriched and acidified (or both acidified and deacidified) under EU rules, though exceptions apply.
  • Reverse osmosis, vacuum evaporation, or cryo-extraction to concentrate the must in permitted contexts.
  • Tannin additions, bentonite, and activated carbon treatments.
  • Oxidation control: macrooxidation (deliberate must hyperoxidation with oxygen or air to precipitate browning phenolics before fermentation, giving more stable whites) and micro-oxygenation (controlled dosing of tiny oxygen amounts during or after fermentation to soften tannins, stabilize color, and reduce reductive aromas). Both techniques require careful control.
  • SO₂ addition: protects from oxidation and microbes; typical additions are 20-80 mg/L at crushing depending on grape health and pH.

3. Fining Agents: When, Why, and Trade-Offs

Fining is the addition of an agent that binds or adsorbs unwanted components, which then settle (or are removed by filtration or centrifugation). Reasons include clarification, removal of excess phenolics (bitterness, astringency, browning), color correction, removal of faults, and stabilization against haze.

AgentOriginTypical useAdvantagesWeaknesses
BentoniteClayProtein stabilization of whites and rosés; clarificationReliable and effectiveCan strip aroma, creates lees volume
GelatinAnimalSoftening of tannic reds, reducing bitternessGentle, effective on tanninsOverfining leads to haze; allergen/vegan issues
Casein / potassium caseinateMilkWhites: reduces browning and oxidized notesEffective for colorAllergen labeling; can leave off-flavors
Egg albuminEggFining of premium redsGentle and classicalAllergen labeling; not vegan
IsinglassFish bladderBrightness for whitesGood clarityAllergen; animal origin
PVPPSynthetic polymerRemoval of browning phenolics and bitternessSelective for small phenolicsMay strip color/aroma if overdone
Activated carbonCharcoalRemoval of color, taint (e.g., smoke, mold)Strong adsorptionNon-selective, strips body and aroma
Silica solSyntheticUsed with gelatin for clarificationGood synergyRequires dosing control
Plant proteins (pea, potato)VegetableVegan alternatives to animal fining agentsNo allergens (pea or potato)Efficacy varies
ChitosanFungal or crustaceanHeavy metals, microbial control, clarificationMulti-purposeDosing limits; source labeling
Copper sulfate / citrateMineralRemoval of H₂S and mercaptansEffective for reductive faultsDosing limits; excess copper is a hazard

Practical principles:

  • Do bench trials before treating a whole lot, to determine the minimum effective dose.
  • Fine as late as is useful and as early as needed: heavy fining immediately before bottling risks a stability problem.
  • Many premium producers avoid fining or use minimal amounts, preferring time and natural settling. Fining reduces risk but can also reduce complexity.
  • Residual fining agents of allergenic origin (milk, egg) must be declared on labels in the EU and other jurisdictions if detectable.

4. Wine Microbiology

Wine fermentation involves a succession of microorganisms. Their general properties were covered in the microbiology series, and here is a winemaker’s summary.

Yeasts

  • Saccharomyces cerevisiae conducts most alcoholic fermentations. It is alcohol tolerant (up to about 15-16%) and ferments efficiently under anaerobic conditions.
  • Non-Saccharomyces yeasts (Hanseniaspora, Candida, Metschnikowia, Torulaspora, Lachancea) dominate the first days of spontaneous fermentation, contribute aromatic complexity, glycerol, and sometimes acidity, but are inhibited by ethanol.
  • Spoilage yeasts: Brettanomyces/Dekkera (volatile phenols), Zygosaccharomyces (refermentation in sweet wines, SO₂ tolerant), and film yeasts (Pichia, Candida) that form a film in the presence of oxygen.

Fungi

Botrytis cinerea may cause grey rot or noble rot; Aspergillus, Penicillium, and others produce mycotoxins and moldy off-odours; laccase from Botrytis oxidizes phenolics aggressively and resists SO₂.

Bacteria

  • Lactic acid bacteria (LAB): Oenococcus oeni for malolactic fermentation (MLF); Lactobacillus and Pediococcus mostly as spoilage organisms (volatile acidity, mannitol, ropiness, biogenic amines).
  • Acetic acid bacteria (Acetobacter, Gluconobacter): oxidize ethanol to acetic acid, producing vinegar taint in wines exposed to air.

Starter cultures and preparations

  • Active dry yeast (ADY) selected for fermentation kinetics, alcohol tolerance, nitrogen needs, aromatic profile, and low H₂S production. Rehydration at about 35-40 °C and temperature-shock avoidance are crucial.
  • Yeast nutrients (ammonium salts, organic nitrogen, thiamine, inactivated yeast) support healthy fermentation.
  • LAB cultures: commercial O. oeni added by direct inoculation or after a short acclimatization, either as co-inoculation (with yeast) or sequentially after alcoholic fermentation.
  • Enzyme preparations: pectinases (juice yield, clarification, extraction of color), β-glucosidases (aroma liberation), glucanases (for botrytized wines, lees autolysis), and lysozyme (for LAB control).
  • Spontaneous fermentation remains valued for complexity but carries more risk of sluggishness or spoilage.

5. Biochemical Changes During Alcoholic and Malolactic Fermentation

Alcoholic fermentation (AF)

Yeast converts hexoses to ethanol and CO₂ through glycolysis. The simplified equation is C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂, though practical yield is lower: about 16.5-17 g/L sugar per 1% vol. ethanol, with the remainder going to heat, biomass, glycerol, and other by-products.

Kinetics typically show:

  1. Lag phase: yeast adapts (hours to a day).
  2. Growth phase: yeast populations expand rapidly to around 10⁷-10⁸ cells/mL, using oxygen and nutrients.
  3. Stationary phase (the main fermentation): highest fermentation rate, though the population is stable. Most sugar is consumed here, and heat is produced (about 1.3 °C per 1% vol. in uncooled mass, so temperature control is needed).
  4. Decline phase: slows as sugar is exhausted and ethanol rises.

Primary and secondary metabolites

  • Primary products: ethanol, CO₂, glycerol (5-10 g/L), succinic acid, acetaldehyde, pyruvate, acetic acid.
  • Secondary metabolites: higher alcohols (fusel alcohols from amino acid metabolism, e.g., isoamyl alcohol), esters (ethyl acetate, isoamyl acetate with banana notes, ethyl hexanoate with apple notes), volatile fatty acids, carbonyls (acetaldehyde, diacetyl), sulfur compounds (H₂S, mercaptans), and volatile thiols released from precursors in Sauvignon blanc-type wines.
  • Temperature effects: cool fermentation (12-18 °C) preserves esters and aromatic freshness in whites; warmer fermentation (24-30 °C) improves extraction for reds.

Malolactic fermentation (MLF)

Oenococcus oeni converts L-malic acid (dicarboxylic) to L-lactic acid (monocarboxylic) and CO₂, lowering total acidity by about 0.5-3 g/L and raising pH by about 0.1-0.3 units. It also modifies aroma (diacetyl, buttery notes), softens mouthfeel, and improves microbial stability by removing a nutrient source. MLF is usual in nearly all reds and in some whites and sparkling base wines. Monitoring by paper chromatography, enzymatic analysis of malic acid, or FTIR determines completion. When MLF finishes, SO₂ is added to protect against further bacterial activity.

Citric acid metabolism by LAB can produce diacetyl and acetic acid, and sugar fermentation by heterofermentative LAB raises volatile acidity.

Causes of sluggish or stuck fermentation

  • Nitrogen deficiency and lack of vitamins (thiamine).
  • Temperature extremes, either too cold or hot (above about 35 °C kills yeast).
  • High initial sugar and ethanol toxicity, especially when stress combines.
  • Lack of oxygen or sterols during the growth phase, or excessively clarified must.
  • Toxic fatty acids (octanoic and decanoic acids) from yeast.
  • Antimicrobial residues: pesticides, excessive SO₂, copper.
  • Killer toxins or competition from other microbes (including bacteria).
  • Poor yeast rehydration and insufficient inoculum.

Remedies: aeration, nutrient additions, adding yeast hulls (cell walls) to adsorb toxins, restarting with a robust alcohol-tolerant strain after gradual acclimatization (a “pied de cuve”), and temperature adjustment.

MLF inhibition arises from low pH (<3.2), high ethanol (>14-15%), excess SO₂, low temperature (<15 °C), phenolics or fatty acids, residual pesticides, and bacteriophages.


6. Maturing, Stabilizing, and Bottling

Post-fermentation steps

After fermentation, the wine is racked off its gross lees (sediment of dead yeast and grape solids). Winemakers may retain fine lees for sur lie aging and bâtonnage (stirring) to add body, mouthfeel, and protection from oxidation.

Maturation and aging

Aging occurs in stainless steel, concrete, large oak vats, or small oak barrels.

  • Barrique (a 225-L Bordeaux-style barrel; Burgundy about 228 L) is used for premium wines. Its thin staves allow slow oxygen transfer (a few mg/L per year), contributing to color stabilization and tannin polymerization, and add oak-derived compounds (vanillin, lactones, tannins, smoky/toasty notes depending on toasting level). Barrel variables include wood species (French, American, Slavonian/Slovenian oak, etc.), grain, seasoning, toast, and age of barrel. New barrels contribute most flavour; used barrels transfer less and act mostly as oxygen-exchange vessels.
  • Alternatives include oak chips, staves, and inserts (permitted in many countries but not all).
  • Aging reactions: polymerization of tannins and anthocyanins, esterification, development of tertiary aromas (leather, tobacco, dried fruit, forest floor), and slow oxidation or reduction effects.

Physico-chemical stabilization

Stabilization is meant to ensure that bottled wine stays clear and stable.

  • Tartrate stability: potassium bitartrate and calcium tartrate crystals can form in bottle. Solutions include cold stabilization (-4 °C for 1-2 weeks), contact seeding, electrodialysis, ion exchange, and additives such as carboxymethylcellulose (CMC), potassium polyaspartate, mannoproteins, or metatartaric acid (short-lived).
  • Protein stability: bentonite fining, or heat test at 80 °C for 30 minutes (or similar) to check stability.
  • Colloidal and phenolic stability: managed by fining agents and filtration, and gum arabic in some cases.
  • Metal casse: iron, copper control by blue fining (potassium ferrocyanide, only under qualified supervision where permitted), citric acid, or copper sulfate.
  • Oxidative stability: control of dissolved oxygen and free SO₂.

Microbiological stabilization

Options include maintaining free SO₂ (typically 25-40 mg/L for dry wines, depending on pH, since the molecular fraction of SO₂ is what is active), sterile filtration (0.45 µm membranes), DMDC where allowed, sorbic acid in sweet wines (with the risk of geranium taint from LAB), pasteurization, and lysozyme.

Filtration and bottling

  • Filtration: depth filters (kieselguhr or diatomaceous earth, cellulose pads), crossflow (tangential) filtration and membrane cartridges for final polishing. Excessive filtration can strip aroma and body, so many producers limit it.
  • Bottling: ensure a clean line, sterile or sanitized equipment, low dissolved oxygen (below ~1 mg/L), adjusted free SO₂, and controlled headspace (inert gas or vacuum) to avoid oxidation. Timing: consider carbonic or oxidative variations from the filling process.

Closures

  • Natural cork is the traditional choice for aging wines. Challenges are TCA (2,4,6-trichloroanisole) cork taint, and variability in oxygen transmission.
  • Technical or agglomerated corks and micro-agglomerated closures offer consistency; synthetic stoppers and screw caps (Stelvin) are common for fresh wines. Closure oxygen transfer rate (OTR) differs and affects aging style, reduction risk, and shelf life. Cork is also renewable and part of the cultural tradition of wine.

7. Wine Faults, Defects, and Diseases

Prevention, recognition, and correction are core winemaker skills. The sources are chemical (oxygen exposure, metals), microbial, or physical (temperature, light).

FaultCauseSymptomsPrevention / correction
OxidationExcess oxygen, low SO₂Browning, acetaldehyde (“bruised apple”, sherry-like)Inert gas, SO₂, ascorbic acid in whites with SO₂, topping up; limited correction
Volatile acidityAcetic acid bacteria, spoilage yeasts, LABVinegar, nail-polish remover (ethyl acetate)Hygiene, no air contact, filtration; legal limit around 1.2 g/L (acetic) in most wines, higher for some special wines
Reduction (H₂S, mercaptans)Nitrogen stress, high sulfur, low redoxRotten egg, cooked cabbage, rubberNutrient management; aeration, copper treatment, early racking
Brettanomyces taintBrettanomyces/DekkeraBarnyard, horse, smoky, medicinal (4-ethylphenol)Cellar hygiene, SO₂, filtration, DMDC, chitosan; monitoring by PCR
Cork taint (TCA)Chlorinated phenols on cork, packagingMusty, wet cardboardQuality control of closures; fining with certain activated carbons/polymers helps little
MousinessBrettanomyces or heterofermentative LABMousy, cracker taste after swallowingHygiene, pH and SO₂ management
Lactic spoilage / ropinessLAB, exopolysaccharidesOil-like viscosity, mannitolSO₂, filtration, hygiene
Geranium taintLAB metabolize sorbic acidGeranium leaf odorAvoid sorbate with LAB presence
RefermentationYeast in residual sugarGas, haze, bottle explosionSterile filtration, adequate SO₂, DMDC
Tartrate crystalsSupersaturated potassium bitartrateCrystals in bottleCold stabilization, CMC
Protein hazeUnstable proteinsWhite haze in warm conditionsBentonite
Metal casseExcess iron or copperBlue-black or white hazePrevent contamination, treat
Light-struck tasteRiboflavin photo-reactionWet wool, cabbage in whites/sparklingDark glass, avoid light
Film yeast / mycodermaOxygen, low alcoholWhite film on surfaceTopping up, SO₂
Smoke taintWildfire volatile phenolsAshy, smoky notesVineyard monitoring; treatment options limited

Diagnosis and methodology

Diagnosis combines sensory evaluation, chemical analysis, and microbiological identification:

  • Stability tests: cold stability (conductivity or freezer test), heat stability for proteins, fining trials, and tests for iron/copper casse (aeration and warm incubation).
  • Chemical analysis: free and total SO₂, volatile acidity, pH, total acidity, residual sugar, malic acid, dissolved oxygen, metals (AAS, ICP), and gas chromatography for specific volatiles.
  • Microbiology: microscopy, plating on selective media (WL nutrient agar, MRS, and others), culture on selective media with cycloheximide for Brettanomyces, qPCR for targeted detection, flow cytometry, and sequencing or MALDI-TOF for identification. Forced-refermentation tests (“stability incubation”) on bottled samples help assess residual microbial risk.

Correct faults early, document corrective actions, and keep dated analytical records for every lot.


8. Health and Nutritional Effects of Moderate Wine Consumption

Wine contains water, ethanol, and a few hundred mg/L to g/L of other compounds. It supplies about 70-85 kcal per 100 mL for dry wine (mostly from alcohol), with small amounts of minerals (potassium, magnesium) and polyphenols.

Antioxidants and bioactive compounds

  • Resveratrol and other stilbenes (found at higher levels in red wine).
  • Anthocyanins and procyanidins (flavan-3-ols), responsible for color and astringency and strong antioxidant activity in vitro.
  • Quercetin, catechin, epicatechin, gallic acid, and hydroxycinnamic acids (caftaric acid).

These compounds scavenge free radicals, chelate metals, and may influence inflammation, platelet aggregation, and vascular function in experimental studies.

Preservation of antioxidants

Phenolic content depends on grape variety, maturity, yield, and winemaking. Practices that preserve it include limited oxygen exposure, moderate extraction, gentle fining (excessive PVPP or carbon strips phenolics), cool and dark storage, and SO₂ protection.

Balanced evidence

The “French paradox” and observational studies once suggested cardiovascular benefits of moderate wine intake. More recent research, including Mendelian randomization and large meta-analyses, has weakened this association, and bioavailability of polyphenols at normal drinking levels is low. Health authorities, including the WHO, emphasize that alcohol is a risk factor for cancer, liver disease, and other conditions, and that no level of intake is risk-free. Common guidelines for low-risk drinking, where given, are about up to one standard drink daily for women and up to two for men, with alcohol-free days, no drinking in pregnancy, and none before driving. Individual health conditions, medications, and age matter. The responsible message is that wine can be part of a meal and culture in moderation, but it should not be promoted as a health supplement.


9. Wine Legislation and Regulations

International framework

  • OIV (International Organisation of Vine and Wine), based in Paris, is an intergovernmental scientific and technical body. It publishes the International Code of Oenological Practices, the Compendium of International Methods of Analysis of Wines and Musts, standards for labeling and definitions, and recommendations that member states may adopt. OIV resolutions are not directly binding but widely influence national laws and trade.
  • Codex Alimentarius and WTO agreements shape trade rules.
  • United States: wine is regulated by the TTB (Alcohol and Tobacco Tax and Trade Bureau, formerly BATF), which defines permitted practices, labeling, appellations (AVAs), and tax rules. The FDA covers food safety aspects.

European Union and Slovenia

Slovenia, as an EU member, follows the EU’s Common Market Organisation (CMO) regulation and rules on oenological practices, labeling, and geographical indications, with national implementation through the Wine Act (Zakon o vinu) and related ordinances (pravilniki). Key principles:

  • Protected Designation of Origin (PDO) and Protected Geographical Indication (PGI), plus wines without geographical indication. In Slovenia, quality tiers within origin-protected wines include quality (kakovostno) and premium (vrhunsko) wines, and special categories linked to harvest sugar (late harvest, selection, berry selection, dried berry selection, ice wine).
  • Wine-growing regions (Podravje, Posavje, Primorska, with their districts), each with defined zones and approved varieties.
  • Controls: registers of vineyards, harvest and production declarations, cellar books, official sensory and analytical evaluation for protected wines, and labeling checks.
  • Permitted practices and limits: SO₂ ceilings (commonly 150 mg/L for dry reds, 200 mg/L for dry whites and rosés in the EU, higher for sweet wines), maximum volatile acidity, enrichment and acidification limits, allergen labeling, and ingredient/nutrition information on labels or e-labels.

Differences between countries

  • Old World (EU) rules tend to be restrictive on viticultural and cellar practices tied to origin (yields, varieties, appellation rules, permitted additions).
  • New World countries (US, Australia, Chile, Argentina, South Africa, and New Zealand) generally give producers more flexibility and emphasize varietal labeling, with some practices differing (e.g., water additions or acidification rules, oak alternatives, mega purple, labeling thresholds).
  • Limits on contaminants (ochratoxin A, heavy metals, pesticide residues, methanol, ethyl carbamate) and rules on export, organic/biodynamic certification, and sulfite labeling (“contains sulfites” above 10 mg/L) vary by jurisdiction.

Compliance means knowing the rules of both the producing and the importing country.


10. Physico-Chemical Analysis and Microbiological Control

Routine analyses

ParameterMethod
Sugar in grapes/mustRefractometry, hydrometer, FTIR
AlcoholDistillation with densitometry, ebulliometry, NIR/FTIR, GC
Total and volatile acidityTitration (volatile acidity by steam distillation / Cash still), enzymatic
pHpH meter
Free and total SO₂Ripper titration, aeration-oxidation, flow-injection
Reducing sugarsEnzymatic, Luff-Schoorl, HPLC
Malic/lactic acidEnzymatic, paper chromatography, HPLC
Phenolics, colorSpectrophotometry (Folin-Ciocalteu, color intensity, hue, anthocyanins)
YANFormol titration, enzymatic kits, NOPA + ammonia
MetalsAAS, ICP-MS
Dissolved O₂Optical sensors
Aroma compoundsGC-MS, GC-FID

Modern labs use FTIR (e.g., WineScan) for rapid multi-parameter analysis after calibration against reference methods.

Microbiological control

Routine monitoring includes microscopic checks of yeast counts and viability, plating on selective media, bioluminescence (ATP) hygiene tests on surfaces, qPCR for Brettanomyces and LAB, and sterility testing of filtered wine before bottling (membrane filtration of a sample on agar).

Quality systems: good practices and HACCP

The acronyms DDP and DLP in the source outline are not standard in English, so I have taken them to refer to the usual quality-system building blocks:

  • Good Manufacturing (Production) Practice and Good Hygiene Practice: standardized procedures for cellar layout, hygiene, equipment, personnel, traceability, supplier control, and documentation.
  • Good Laboratory Practice (GLP): reliable, traceable, validated analysis (calibrated instruments, reference materials, controls, proficiency tests, ISO 17025 accreditation where applicable).
  • HACCP (Hazard Analysis and Critical Control Points): systematic identification of biological, chemical, and physical hazards (e.g., mycotoxins, glass fragments, allergen cross-contamination, pesticide residues), definition of critical control points (for example, free SO₂ at bottling, filtration integrity, bottle washing), critical limits, monitoring, corrective actions, verification, and records.

Together, these systems ensure that every lot is traceable from vineyard to bottle, that corrective actions are documented, and that wine reaching consumers is safe and consistent.


Summary

Enology combines chemistry, microbiology, engineering, and craft. Grapes bring sugars, acids, phenolics, nitrogen, and minerals, and the winemaker’s choices of processing scheme, must correction, yeast and bacteria, fining, aging, and stabilization determine style and stability. Alcoholic and malolactic fermentations create the main compounds of wine, and understanding their kinetics, metabolites, and risks (sluggish fermentations, spoilage) lets winemakers intervene early. Faults can usually be prevented through hygiene, oxygen management, and monitoring, and analytical and microbiological tests confirm that a wine is stable before bottling. Wine’s health effects should be viewed with balance, since moderate consumption is a cultural and sensory pleasure rather than a medical recommendation. Finally, legislation at the OIV, EU, and national levels, together with quality systems such as HACCP and good practice programs, provides the framework within which wine is made, labeled, and traded. A beginner who masters these fundamentals will be well prepared to explore each topic in greater depth.